A brief insight into our production.

Tensile test

THE PRODUCTION

Made in
Germany &
Austria

The POP Fender is 100% a European product: the technology center, development and research are located in Austria, while the production of the components takes place in Germany.

The TPV material is produced in Wales UK and in the USA, TPU in Germany.

We have also made sure that our additional products come from Europe.

This keeps the supply routes short and we can be sure that the production is fair and of high quality.

fender telescopic on both sides

Small & Compact

The POP Fender is telescopic from 620mm to 250mm on both sides. The POP Fender is therefore smaller than ANY other fender.

There are new, unimagined stowage possibilities like never before. The POP Fender really saves space on the boat! Pure luxury!

Pop Fender is recyclable

Environment

POP Fender is made of TPV material – thermoplastic vulcanizates or cross-linked thermoplastic elastomers based on olefins, mainly EPDM with small amount of polypropylene (PP). TPV is:

  • free from harmful substances and plasticizers
  • non-toxic
  • durable
  • recyclable

Conventional fenders are all made of PVC, which directly harms the environment by outgassing the plasticizers which is no longer justifiable nowadays.

Once your POP Fender is getting on in years, you can send it back to us. We wash and shred the old POP Fenders so that the material can be reused. In this way, everyone contributes a little bit to a more sustainable world!

For the nerds among you, here are some links for more info about the material:

Pop Fender is recyclable

Environment

POP Fender is made of TPV material – thermoplastic vulcanizates or cross-linked thermoplastic elastomers based on olefins, mainly EPDM with small amount of polypropylene (PP). TPV is:

  • free from harmful substances and plasticizers
  • non-toxic
  • durable
  • recyclable

Conventional fenders are all made of PVC, which directly harms the environment by outgassing the plasticizers which is no longer justifiable nowadays.

Once your POP Fender is getting on in years, you can send it back to us. We wash and shred the old POP Fenders so that the material can be reused. In this way, everyone contributes a little bit to a more sustainable world!

For the nerds among you, here are some links for more info about the material:

Pop Fender - telescopic fender - compact and innovative

No squeaking

The POP Fender material TPV does not contain plasticizers and therefore does not squeak. There is also less streaking.

Pop Fender can be ordered in many RAL colors

Colors

On request you can order the POP Fender in many RAL colors to perfectly match your boat design – for a very personal touch!

Pop Fender is recyclable

Hardly any streaks

Streaking is much less compared to conventional PVC fenders.

Should there still be traces, they can be removed with ease – without scrubbing or chemicals!

With POP Fender you don’t need fender socks anymore either!

More money saved and according to this forum, fender socks aren’t really all that practical anyway:

Pop Fender is maintenance free

Maintenance-free

You do not need an air pump. The POP Fender cannot burst.

You can replace and/or reorder the individual segments as needed.

Pop Fender is washable in the dishwasher

Care

You can easily wash the POP Fender in the dishwasher at 65°. 4 fenders fit in the dishwasher.

Pop Fender can be used under water

Operation under water

The POP Fender is the first fender that can be used under water. It can float naturally because the material has a density of 0.92kg/dm³, making it lighter than water.

The use under water is only suitable for 2 to 3 days.

POP Fender is suitable for NOK locks

NOK locks start at an angle (see picture). As you can use the POP Fender underwater, the underwater hull does not hit the lock wall.